Single-acting cylinders with load return and safety ring

0,00

FPT high tonnage lock nut hydraulic cylinders, with gravity return.

CSE GS Series are with the threaded safety ring, the load can be mechanically locked and held for extended periods of time even when the hydraulic pump is disconnected. Therefore, the operator can work under a lifted load in complete safety.

Cylinders designed for heavy lifting, to support and hold bridges, viaducts and heavy structural steelwork.

Hydraulic cylinders with gravity return, max pressure 700 bar

The end-stroke ring guarantees maximum operator safety, preventing plunger over-stroke.

High-strength removable head.

Custom made hydraulic cylinders high pressure can be manufactured on customer request up to 3000 ton.

SKU: Series CSE GS Categoría:

Descripción

High tonnage hydraulic cylinders with lock nut

SHigh tonnage hydraulic cylinders with lock nut in high pressure. Pushing force from 10 to 600 tons with a stroke range from 25 mm to 300 mm. High tonnage suitable for lifting and pushing operations. Operating pressure 700 bar.

Guide surfaces are sized to guarantee optimal performance in absorbing the offset load and the end stroke ring increases safety for the operator by avoiding the extra stroke of the piston.

Hydraulic jacks equipped with high strength gaskets for maximum durability up to 60° C, upon request it is possible to equip the cylinder with gaskets resistant to high temperatures up to 200° C. Furthermore, the presence of the wiper prevents contamination from impurities present in the environment of use.

Cylinders are equipped with a 3/8 «NPT female coupler equipped with an anti dust cap and removable high resistance head and possibility of mounting a self-leveling head for a better distribution of the load to be lifted.

Nitox ONC treatment on all internal mechanical parts for maximum resistance to corrosion and wear.

All models weighing up to 20 kg are equipped with lifting eyebolts.

Sectors of use: steel mills, energy, industry, infrastructure, engineering and testing, mining, shipbuilding, offshore, oil & gas, transport and heavy lifting.

Possibility to design and produce custom made hydraulic cylinders on request, with dedicated geometries, performances and features.

All models can be connected to different drive units such as hand pumps or electric, air, petrol pumps. A wide range of accessories such as hoses, valves and pressure gauges are available for the composition of the desired hydraulic circuit.

  • Single-acting cylinders with load return and safety ring
  • Cylinders up to 3,000 tons

+39 0185 337525

Tech data sheet: CSE GS Series - Single-acting cylinders with load return and safety ring
CSE GS Series Single-acting cylinders with load return and safety ring

Share this product!

Go to Top